1. remove disk from veritas control if it belongs to a disk group; if it doesn’t belong to a disk group proceed to step 2 a. # vxdiskadm b. select option 4 to “remove a disk for replacement” c. enter the veritas disk name to remove d. choose the disk you want to use to […]

1. Boot from the network or from the CD-ROM. 2. Run fsck, then mount slice 0 from the primary boot disk onto /mnt 3. Restore the file(s) that need to be restored from your backup tape. 4. Use a vfstab that mounts underlying partitions directly rather than one that mounts volumes. You can use commands

Introduction This is a quick outline of a document describing how to set up IP multipathing in our environment. The goal is to implement a standard naming convention for the different addresses as well as for the network adapter group name. Pre-Requisites 1. Solaris 2.8 10/00 or later must be installed 2. Each interface must

ls -laR | grep -c “^-.*” Original post blogged on b2evolution.

1. Boot from 1st linux CD. 2. Then when the computer boots, type in this parameter: 3. linux vnc vncpassword=123456 (minimum 6 characters) 4. Press Enter, then the kernel will be loaded. After that, we will be asked how to setup the network, either using DHCP or manually. Choose Manual if applies. 5. Enter the