Syntax: unzip {.zip-file-name}-d {/path/to/extract} For example extract package.zip into /opt, enter: # unzip 10_Recommended.zip -d /10_Recommended-29-May-2013/ # cd /10_Recommended-29-May-2013/ # ls
Unzip files in particular directory or folder under Linux or UNIX Read More »
Installing server firmware fixes through the operating system is a disruptive process. You will need to restart the system. Notes: If your system is managed by an HMC, you must apply server firmware through the HMC. For details, see Managed system updates in Updates. If you have a System i® model running IBM® i, you
How to Upgrade IBM Power server firmware fixes through AIX or Linux without an HMC Read More »
You can install a firmware fix permanently by using either the flash command or the AIX diagnostic service aids. Note: To perform this task, you must meet the following criteria: You must have root user authority. You must start your server from the temporary side. For details, see Working with the temporary and permanent side
Using AIX commands to install a firmware fix permanently Read More »
LUNz is the logical unit number that an application client uses to communicate with, configure and determine information about an SCSI storage array and the logical units attached to it. The LUN_Z value shall be zero. LUNz has been implemented on CLARiiON arrays to make arrays visible to the host OS and PowerPath when no
AIX LUNs(LUNz) presented to host? Read More »
The best way is to use the commands set_parms hostname set_parms ip_addr If you want to change every parameter from scratch than you can use set_parms initial This makes necessary changes to the all files too. You might also need to change the default route, for that use SAM.
How to change IP-Address and Hostname on HP-UX 11.31 Read More »
[root@sunx4150 run]# ps -ef | grep http root 7222 6826 0 10:32 pts/1 00:00:00 grep http [root@sunx4150 run]# pwd /etc/httpd/run [root@sunx4150 run]# ls acpid.socket dirmngr hpssd.pid mdadm nscd radvd sshd.pid vmnet-dhcpd-vmnet8.pid xenstored agent.pid dovecot hpssd.port mdmpd ntpd.pid rpc.statd.pid sudo vmnet-natd-8.mac xfs.pid atd.pid dsviewserver.pid httpd.pid messagebus.pid openldap saslauthd syslogd.pid vmnet-natd-8.pid xinetd.pid avahi-daemon gather iiim mysqld ppp
Linux httpd service not start Read More »
Memory Memory Leak: Caused by a program that repeatedly allocates memory without freeing it. When a process exits, its working storage is freed up immediately and its associated memory frames are put back on the free list. However any files the process may have opened can stay in memory. AIX tries to use the maximum
AIX Memory / RAM performance monitoring Read More »
SDD is designed to support the multipath configuration in the ESS. The software used to balance ESS I/O traffic across all adapters. It provides multiple access to data from the host. when using sdd cfgmgr is run 3 times (cfgmgr -l fcs0, cfgmgr -l fcs1, cfgmgr (the third one builds the vpaths)) 3 policies exist
AIX SDD (subsystem device driver) Read More »
Encrypting Filesystem on AIX 6.1. EFS offers 2 modes of operation: Root Admin mode This is the default mode. Root can reset user and group keystore passwords. Root Guard mode Root does not have access to user’s encrypted files and cannot change their passwords. Note: NFS exports of EFS filesystems are not supported. 1. Prerequisites:
How to Encrypt File System in AIX ? Read More »
To show the current paging space volume, its size along with other information use the ‘lsps’ command: # lsps -a Page Space Physical Volume Volume Group Size %Used Active Auto Type Chksum hd6 hdisk1 rootvg 512MB 2 yes yes lv 0 The paging space may be increased on the fly using the ‘chps’ command. In
How to Increase paging space logical volume size in AIX ? Read More »