Ignite tape backup error after upgrade to 11iv3 from 11iv2

# hostname

hpux02
# mt status -f /dev/rmt/c2t1d0BESTnb
Drive:  IBM ULTRIUM-TD3
Format:
Status: [41014438] BOT online immediate-report-mode
File:   0
Block:  0

# make_tape_recovery -l -v -x inc_entire=vg00 -a /dev/rmt/0mnb
* Creating local directories for configuration files and archive.

=======  08/11/11 09:33:56 IST  Started make_tape_recovery. (Thu Aug 11 09:33:56 IST 2011)
@(#)Ignite-UX Revision C.7.11.439
@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1009/ignite/src@81482 Last Modified: 2010-06-10 11:10:03 -0600 (Thu, 10 Jun 2010)

* Checking Versions of Ignite-UX filesets
* Scanning system for IO devices…
* Boot device is: 0/1/1/0.0xa04b962191b4b7c.0x0
* Creating System Configuration.
* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2011-08-11,09:33/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Backing Up Volume Group /dev/datavg
* /usr/sbin/vgcfgbackup /dev/datavg
* Creating Map Files for Volume Group /dev/datavg
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/datavg.mapfile /dev/datavg

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2011-08-11,09:33/archive_cfg -g /var/opt/ignite/recovery/2011-08-11,09:33/flist -n
2011-08-11,09:33 -r ipf -b 64 -d Recovery Archive -t 22 -i 1 -m t
* Saving the information about archive to /var/opt/ignite/recovery/previews
* Creating The Tape Archive
WARNING: You are about to create an Itanium-based recovery tape.  If this system does NOT support direct tape boot, you will need to perform “two-step media
recovery” where the boot media (CD or DVD) has the same version of Ignite-UX as the version on this tape.
ERROR:   The IINSTALL kernel either does not exist or is not executable!
ERROR:   System Error, /opt/ignite/bin/make_ipf_tape failed creating IPF boot tape.
ERROR:   Failed to generate LIF on tape.

=======  08/11/11 09:35:25 IST  make_tape_recovery completed unsuccessfully

Solution : Your Ignite-UX.BOOT-KRN-11-23 is problem…..

# swremove Ignite-UX

=======  08/11/11 09:39:16 IST  BEGIN swremove SESSION
(non-interactive) (jobid=hpux02-0066)

* Session started for user “root@hpux02”.

* Beginning Selection
* Target connection succeeded for “hpux02:/”.
* Software selections:
+ IGNITE,r=C.7.11.439,a=HP-UX_B.11.31_IA/PA,v=HP
Ignite-UX.BOOT-COMMON-IA,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-COMMON-PA,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-23,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-23,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,l=/,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
* A “+” indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.

* Beginning Analysis
* Session selections have been saved in the file

“/.sw/sessions/swremove.last”.
* The analysis phase succeeded for “hpux02:/”.
* Analysis succeeded.

* Beginning Execution
* The execution phase succeeded for “hpux02:/”.
* Execution succeeded.

NOTE:    More information may be found in the agent logfile using the
command “swjob -a log hpux02-0066 @ hpux02:/”.

=======  08/11/11 09:39:31 IST  END swremove SESSION (non-interactive)
(jobid=hpux02-0066)

#  swinstall -s 10.0.50.197:/var/11iv3/update-depot Ignite-UX

=======  08/11/11 09:41:49 IST  BEGIN swinstall SESSION
(non-interactive) (jobid=hpux02-0068)

* Session started for user “root@hpux02”.

* Beginning Selection
* Target connection succeeded for “hpux02:/”.
* Source connection succeeded for
“10.0.50.197:/var/11iv3/update-depot”.
* Source:                 10.0.50.197:/var/11iv3/update-depot
* Targets:                hpux02:/
* Software selections:
+ IGNITE,r=C.7.11.439,a=HP-UX_B.11.31_IA/PA,v=HP
Ignite-UX.BOOT-COMMON-IA,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-COMMON-PA,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-11,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-23,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-KRN-11-31,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.BOOT-SERVICES,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-DOC,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.CD-TOOLS-SRC,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-DOC,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.DVD-TOOLS-SRC,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-11,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-23,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.FILE-SRV-11-31,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNITE,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-ENG-A-MAN,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-E-MAN,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.IGNT-JPN-S-MAN,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.MGMT-TOOLS,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
Ignite-UX.RECOVERY,r=C.7.11.439,a=HP-UX_B.11.11_32/64,v=HP,fr=C.7.11.439,fa=HP-UX_B.11.11_32/64
* A “+” indicates an automatic selection due to dependency or
the automatic selection of a patch or reference bundle.
* Selection succeeded.

* Beginning Analysis and Execution
* Session selections have been saved in the file
“/.sw/sessions/swinstall.last”.
* The analysis phase succeeded for “hpux02:/”.
* The execution phase succeeded for “hpux02:/”.
* Analysis and Execution succeeded.

NOTE:    More information may be found in the agent logfile using the
command “swjob -a log hpux02-0068 @ hpux02:/”.

=======  08/11/11 09:43:00 IST  END swinstall SESSION (non-interactive)
(jobid=hpux02-0068)

# export TAPE=/dev/rmt/c2t1d0BESTnb
# mt fsf
# mt status

Drive:  IBM ULTRIUM-TD3
Format:
Status: [81014438] EOF online immediate-report-mode
File:   1
Block:  0
#

Now backup started….

#  make_tape_recovery -l -v -x inc_entire=vg00 -a /dev/rmt/0mnb
* Creating local directories for configuration files and archive.

=======  08/11/11 09:45:09 IST  Started make_tape_recovery. (Thu Aug 11 09:45:09 IST 2011)
@(#)Ignite-UX Revision C.7.11.439
@(#)ignite/net_recovery (opt) Revision: /branches/IUX_RA1009/ignite/src@81482 Last Modified: 2010-06-10 11:10:03 -0600 (Thu, 10 Jun 2010)

* Checking Versions of Ignite-UX filesets
* Scanning system for IO devices…
* Boot device is: 0/1/1/0.0xa04b962191b4b7c.0x0
* Creating System Configuration.
* /opt/ignite/bin/save_config -f /var/opt/ignite/recovery/2011-08-11,09:45/system_cfg vg00
* Backing Up Volume Group /dev/vg00
* /usr/sbin/vgcfgbackup /dev/vg00
* Creating Map Files for Volume Group /dev/vg00
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/vg00.mapfile /dev/vg00

* Backing Up Volume Group /dev/datavg
* /usr/sbin/vgcfgback

up /dev/datavg
* Creating Map Files for Volume Group /dev/datavg
* /usr/sbin/vgexport -s -p -m /etc/lvmconf/datavg.mapfile /dev/datavg

* Creating Control Configuration.
* Creating Archive File List
* Creating Archive Configuration

* /opt/ignite/lbin/make_arch_config -c /var/opt/ignite/recovery/2011-08-11,09:45/archive_cfg -g /var/opt/ignite/recovery/2011-08-11,09:45/flist -n
2011-08-11,09:45 -r ipf -b 64 -d Recovery Archive -t 22 -i 1 -m t
* Saving the information about archive to /var/opt/ignite/recovery/previews
* Creating The Tape Archive
WARNING: You are about to create an Itanium-based recovery tape.  If this system does NOT support direct tape boot, you will need to perform “two-step media
recovery” where the boot media (CD or DVD) has the same version of Ignite-UX as the version on this tape.
* /opt/ignite/data/scripts/make_sys_image -c n -d /dev/rmt/0mnb -t n -s local -n 2011-08-11,09:45 -m t -w
/var/opt/ignite/recovery/2011-08-11,09:45/recovery.log -u -R -g /var/opt/ignite/recovery/2011-08-11,09:45/flist -a 37597060

* Preparing to create a system archive.

* Archiving contents of gmhpux02 via tar image to local device /dev/rmt/0mnb.
* Creation of system archive complete.
NOTE:    The following files are in the list of files that were on the
system, but they are no longer present.  These files are not
included in the backup:
/var/tmp/ign_configure/make_sys_image.log
/var/opt/ignite/tmp/AAA006970
/var/opt/ignite/tmp/BAA006970

* Archive created and rewind the tape to beginning of tape.

NOTE: Could not read the /etc/resolv.conf file.
* Cleaning up old configuration file directories

=======  08/11/11 10:04:33 IST  make_tape_recovery completed successfully!

!!!!!!Have a nice day……..

Leave a Reply

Your email address will not be published. Required fields are marked *

CAPTCHA * Time limit is exhausted. Please reload the CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.