Set Control Station date and time
You must log in as root to perform this operation.
To set the date and time for a Control Station, use this command syntax:
# date -s “<hh:mm mm/dd/yy>”
where:
<hh:mm mm/dd/yy> = time and date format
Example:
To set the date and time to 5:40 P.M. on August 8, 2012, type:
# date -s “17:40 08/08/12”
Set Data Mover or blade date and time
You can customize the display of the date and time on a Data Mover or blade by
using the server_date command. Configuring Time Services on VNX provides
additional information on time services.
To set the current date and time for a Data Mover or blade, use this command syntax:
$ server_date <movername> <yymmddhhmm> [<ss>]
where:
<movername> = name of the Data Mover or blade
<yymmddhhmm> [<ss>] = where <yy> is the year; the first <mm> is the month; <dd> is the day;
<hh> is the hour (in 24-hour system); and the second <mm> is the minute, and <ss> is the second.
Example:
To set the date and time on server_2 to July 4, 2012, 10:30 A.M., type:
$ server_date server_2 1207041030