Login using nasadmin user. Verify that the blades booted successfully. Type: # /nasmcd/sbin/getreason Sample output for systems with 2 blades: [nasadmin@VNXCS01 ~]$ /nasmcd/sbin/getreason 10 – slot_0 primary control station 11 – slot_1 secondary control station 5 – slot_2 contacted 5 – slot_3 contacted
How to configure a VMware ESX / ESXi host with a QLogic HBA to boot from SAN in a CLARiiON environment Solution: This procedure explains how to configure the QLogic HBA to boot ESX/ESXi from SAN. The procedure involves enabling the QLogic HBA BIOS, enabling the selectable boot, and selecting the boot LUN. Procedure: 1. …
This web page is a quick guide on what to install and how to check that EMC SAN is attached and working Solaris Installing ========================================================== Install Emulex driver/firmware, san packages (SANinfo, HBAinfo, lputil), EMC powerpath Use lputil to update firmware Use lputil to disable boot bios Update /kernel/drv/lpfc.conf Update /kernel/drv/sd.conf Reboot Install ECC agent …